Coats

Cardigans header

Cardigans

Seam strength, seam elongation and comfort are key components for knitted cardigans. Our comprehensive range of sewing threads for knitwear does exceptionally well in these areas.

Polyester corespun sewing thread is recommended, but occasionally with wool or cotton garments, there is a requirement for the sewing thread used in creating Cut & Sew knitwear to have less lustre. When this is the case, a polyester/cotton sewing thread can be substituted in the corresponding Tex sizes.

On overlock, chainstitch and coverseaming operations, the under thread may be substituted for Gramax if a greater degree of seam covering is required.

Approximate thread consumption is 80 metres. Depending on the required final quality, alternative thread types may be used. Thread size will determine needle size.

For more information, check out our recommendations below.

Take the next step

Contact one of our experts to find out more information.

Application guide

Menswear Cardigan

Register to view stitch details

You will be able to access our extensive thread database and save your favourite content to your own personalised area of the site.

Register

Already have an account? Sign in

Disclaimer

The sewing thread recommendations laid out above are intended as a guide to aid the construction of garments with good quality seams. As garments of the same generic type differ in terms of fabric substrate and construction, and both making up methods and post make up processing can greatly vary, these recommendations should be viewed as a good starting point for thread selection.

Knitwear can be divided into two distinct sections:

  • Fully fashioned, which mainly uses the same yarns for making as the fabric is constructed from and therefore, relatively little sewing thread.
  • Cut and sew, to which the table above refers

The main factors to consider when selecting the sewing thread are:

  • The demands of the stitching operation
  • The amount of load / demand placed on the seam
  • The type and weight of fabric being sewn
  • Any post make up processing such as, shrink resist finishing

Coverseaming on Cut and Sew Knitwear may involve the following stitch types:

  • 406 - Twin needle coverseam
  • 407 - Three needle coverseam

They are generally only used for attaching stolls to cardigans. The recommendations in the table above apply to both of these stitch types.

Garment specific recommendations for thread and needle selection as well as accurate thread consumption figures and onsite technical support can be obtained by contacting your local Coats' office.

These recommendations and consumption figures are intended as a guide only and are given in good faith but without warranty or liability on the company or its employees.