Acquisition and Placing

Acquisition and Placing

DISCLAIMER

ELECTRONIC VERSIONS OF THE MATERIALS (THESE “MATERIALS”) YOU ARE SEEKING TO ACCESS ARE BEING MADE AVAILABLE ON THIS WEBSITE BY COATS GROUP PLC (THE “COMPANY”) IN GOOD FAITH AND FOR INFORMATION PURPOSES ONLY. THESE MATERIALS ARE NOT DIRECTED AT OR INTENDED TO BE ACCESSIBLE BY PERSONS LOCATED IN THE UNITED STATES OF AMERICA (EXCEPT TO QIBS, AS DEFINED BELOW), CANADA (except to those who are Accredited Investors and Permitted Clients, as defined below), AUSTRALIA, JAPAN OR SOUTH AFRICA OR ANY OTHER JURISDICTION IN WHICH IT WOULD BE UNLAWFUL. THE MATERIALS ARE NOT AN OFFER OR INVITATION TO BUY OR SELL SECURITIES. IN REVIEWING THIS INFORMATION, YOU ARE ACKNOWLEDGING THE CONFIDENTIAL NATURE OF THIS INFORMATION AND ARE AGREEING TO ABIDE BY THE TERMS OF THIS DISCLAIMER.

Please read this notice carefully - it applies to all persons who view this site. Please note that the disclaimer set out below may be altered or updated. You should read it in full each time you visit the site.

Overseas Persons

Viewing the information in these Materials may not be lawful in certain jurisdictions. In other jurisdictions only certain categories of person may be allowed to view this information. Persons into whose possession these Materials come should inform themselves about and observe any such legal restriction and consult their professional advisers as appropriate.

These Materials are for information purposes only and do not constitute an offer to sell or issue or the solicitation of an offer to buy, subscribe for or acquire any securities mentioned in the Materials (the “Securities”) in any jurisdiction in which any such offer or solicitation would be unlawful. The information contained herein is restricted and is not for release, publication or distribution, in whole or in part, directly or indirectly, in or into or from the United States (except to QIBs, as defined below), Canada (except to those who are Accredited Investors and Permitted Clients), Australia, Japan, South Africa or any other jurisdiction in which such release, publication or distribution would be unlawful. Potential users of this information are requested to inform themselves of, and to observe, any such restrictions.

Neither the Materials nor any part of them constitutes or forms a part of any offer or solicitation to purchase or subscribe for securities in the United States, Canada, Australia, Japan or South Africa.

The Materials are not an offer to sell or a solicitation of an offer to buy any securities and is not for release, publication or distribution in the United States except to QIBs (as defined below). The Securities mentioned herein have not been and will not be registered under the US Securities Act of 1933, as amended (the “Securities Act”), and may not be offered, sold, resold, delivered or distributed, directly or indirectly, in or into or from the United States absent registration under the Securities Act, except pursuant to an applicable exemption from, or in a transaction not subject to, the registration requirements of the Securities Act and in compliance with the securities laws of any state or other jurisdiction of the United States. The Securities have not been approved, disapproved or recommended by the US Securities and Exchange Commission, any state securities commission in the United States or any other US regulatory authority, nor have any of the foregoing authorities passed upon or endorsed the merits of the offering of the Securities referred to in the Materials or the accuracy or adequacy of the Materials. The Company does not intend to register any portion of the offering in the United States or to conduct a public offering of any securities in the United States. The Materials may not be viewed by persons within the United States (within the meaning of Regulation S under the Securities Act) other than “qualified institutional buyers” (“QIBs”) (as defined in Rule 144A under the Securities Act) and in accordance with any applicable securities law of any state or other jurisdiction of the United States.

In Canada, the Materials are directed only to purchasers in Canada only in the provinces of Alberta, British Columbia, Ontario and Québec purchasing, or deemed to be purchasing, as principal that are “accredited investors”, as defined in National Instrument 45-106 Prospectus Exemptions or subsection 73.3(1) of the Securities Act (Ontario) (each, an “Accredited Investor”), and are “permitted clients”, as defined in National Instrument 31-103 Registration Requirements, Exemptions and Ongoing Registrant Obligations (each, a “Permitted Client”). In connection with any sale made to investors that are located in the foregoing provinces, you will be required to provide a signed investor qualification statement, confirming your eligibility to participate. If you are not resident in one of the foregoing provinces nor both an Accredited Investor and a Permitted Client, you are not permitted to review the Materials nor proceed to the website. If you are in any doubt as to whether you qualify as both an Accredited Investor and a Permitted Client, please exit the website and return only after confirming your eligibility to continue.

The Securities mentioned herein will not be registered under or offered in compliance with applicable securities laws of any state, province, territory, county or jurisdiction of the United States, Canada, Australia, Japan or South Africa. Accordingly, unless an exemption under the relevant securities law is applicable, the Securities may not be offered, sold, resold, delivered or distributed, directly or indirectly, in or into the United States (except QIBs), Canada, Australia, Japan or South Africa or any other jurisdiction if to do so would constitute a violation of the relevant laws of, or require registration thereof in, such jurisdiction.

Any person who wishes to view the Materials must first satisfy themselves that they are not subject to any local requirements that prohibit or restrict them from doing so. It is your responsibility to satisfy yourself as to the full observance of any relevant laws and regulatory requirements.

Save as set out above, the Materials are directed only at and may only be communicated to persons (i) in the European Economic Area (the “EEA”) who are “qualified investors” within the meaning of Regulation (EU) 2017/1129, as amended (“Qualified Investors”); and (ii) in the United Kingdom, to “qualified investors” as defined in Regulation 2(e) of the UK Prospectus Regulation, who are: (i) persons having professional experience in matters relating to investments falling within Article 19(5) of the Financial Services and Markets Act 2000 (Financial Promotion) Order 2005 (as amended) (the “Order”); (ii) high net worth entities falling within Article 49(2)(a) to (d) of the Order; and (iii) any other person to whom it can otherwise be lawfully distributed (all such persons referred to in (i), (ii) and (iii) together being referred to as “Relevant Persons”). Any investment or investment activity to which the Materials relate, save as set out above, is only available (i) in any member states of the EEA, to Qualified Investors; and (ii) in the United Kingdom, to Relevant Persons. Any person who is not a Relevant Person in any member state of the EEA or a Qualified Investor in the United Kingdom, or is not otherwise permitted under applicable law or regulation to access the Materials, should not act or rely on the Materials.

If you are not permitted to view Materials on this website or are in any doubt as to whether you are permitted to view these materials, please exit this webpage.

Basis of Access

Making press announcements and other documents available in electronic format does not constitute an offer to sell or the solicitation of an offer to buy securities in the Company. Further, it does not constitute a recommendation by the Company or any other party to sell or buy securities of the Company.

Unless otherwise determined by the Company and permitted by applicable law and regulation, copies of the contents of the following pages (including documents posted thereon) are not being, and must not be, released or otherwise forwarded, distributed or sent in or into United States (except to QIBs), Canada (except to those who are Accredited Investors and Permitted Clients), Australia, Japan or South Africa and persons receiving such documents (including custodians, nominees and trustees) must not distribute or send them in, into or from United States (except to QIBs), Canada, Australia, Japan or South Africa.

General

The information contained in the Materials is not comprehensive. Although care has been taken in the preparation of the information, not all such information may be accurate and up to date in all respects and the Company accepts no responsibility to update the information contained in this website. No reliance may be placed for any purpose whatsoever on the information or opinions contained in the Materials or any other document or oral statement or on the completeness, accuracy or fairness of such information and/or opinions therein. All information is provided without any warranties of any kind and the Company and its advisers make no representations and disclaim all express and implied warranties and conditions of any kind, including, without limitation, representations, warranties or conditions regarding accuracy, timeliness, completeness, non-infringement, merchantability or fitness for any particular purpose and the Company and its advisers assume no responsibility to you or any third party for the consequences of any errors or omissions. Neither the Company nor its advisers accept any liability for any direct or indirect or consequential loss or damages of any kind resulting from any use of this website or any information contained in it.

Certain information in the Materials is of a historical nature and may be out of date. All historical information should be understood to speak from the date of its publication. Actual results and developments may be materially different from any opinion or expectation expressed in the Materials. In addition, past performance is no guide to future performance, whether of the Company or its securities.

You agree that the materials you receive are for your own use and will not be distributed to any person outside of your organisation.

Confirmation of understanding and acceptance of disclaimer

Electronic versions of these Materials are not directed at or accessible by persons located in the United States (except to QIBs), Canada (except to those who are Accredited Investors and Permitted Clients), Australia, Japan or South Africa.

  1. I certify that I am not located in the United States (except for QIBs), Canada (except for those who are Accredited Investors and Permitted Clients in the provinces of Alberta, British Columbia, Ontario and Québec), Australia, Japan or South Africa or any other jurisdiction where accessing these materials is unlawful and I am not acting on behalf of someone who is located in any jurisdiction where accessing these materials is unlawful.
  2. I agree that I will not forward, transfer or distribute (by any means including by electronic transmission) any information contained in this website (either in whole or in part) to any person located in the United States (except to QIBs), Canada, Australia, Japan or South Africa or any other jurisdiction where accessing such information is unlawful.
  3. I have read and understood the disclaimer set out above. I understand that it may affect my rights. I agree to be bound by its terms. I intend to access the website for information purposes only. I confirm that I am permitted to access electronic versions of these Materials and that breach of these certifications could mean that I am in breach of applicable laws or regulations.
Certifications

By clicking on the “AGREE” button, you represent and warrant that that you have read, understand and agree to comply with all of the restrictions set forth above and that you are authorised to access the information and documents on this webpage without being subject to any legal restriction and without any further action required by the Company.

By clicking on the “DISAGREE” button at the bottom of this page, you will not be able to proceed to the website.