Childrenswear - Nightwear
With comfort of utmost importance in pajamas, our high quality sewing threads can enhance seam softness resulting in more comfortable garments.
Children’s dressing gowns require approximately 165 meters of thread. Children's pajamas require approximately 100 meters of thread. Children's night dresses require approximately 55 meters of thread.
Alternative thread types may be used depending on required final quality. The thread size will determine the choice of needle size.
For more information, check out our recommendations below.
Take the next step
Contact one of our experts to find out more information.
Coverseaming on ladies’/girls' sleep wear may involve the following stitch types:
- 406 - Twin needle coverseam
- 407 - Three needle coverseam
- 602 - Twin needle coverseam with a top covering thread
- 605 - Three needle coverseam with a top covering thread
- 607 - Flatseam, Four needle coverseam with a top covering thread
The recommendations in the table above apply to all of these stitch types. The choice of which thread to use for top cover is determined by the appearance required. Popular top covering threads include: Gramax, Epic and Sylko. On woven material the overlock and coverseam loopers should use Epic Tex 18.
For the overlock loopers it may be possible to use Epic Tex 18 or Gramax Tex 18. Both of these threads will offer finer seams than the threads in the table above.
Garment specific recommendations for thread and needle selection as well as accurate thread consumption figures and on-site technical support can be obtained by contacting your local Coats' office.
The sewing thread recommendations laid out above are intended as a guide to aid the construction of garments with good quality seams. As garments of the same generic type differ in terms of fabric substrate and construction, and both making up methods and post make up processing can greatly vary, these recommendations should be viewed as a good starting point for thread selection.
These recommendations and consumption figures are intended as a guide only and are given in good faith but without warranty or liability on the company or its employees.